Tips to Maintaining Aerzen Blowers. Maintenance Schedules for Belts, Filters & Replacement Parts

www.ablewright.com

By Doug Mitch / Able Wright, Inc.

Aeration blowers must be properly serviced to insure reliable operation. The Manufacturer has provided the following general operator maintenance schedule recommendations…

After the First 25 Operating Hours:

Retighten all retaining bolts and screws, after the machine has cooled

Check the condition of the V-belts, re-align or replace belts as necessary

Check oil level

Check the function of the pressure valve

Weekly:

Check inlet air filter for contamination, replace as necessary

Maximum recommended inlet filter differential: -45 bar

Check oil level

After the First 500 Operating Hours:

Drain and replace the lubricating oil

Check the condition of the V-belts, re-align or replace belts as necessary

Every 4,000 Operating Hours, or half-yearly:

Check the condition of the V-belts, re-align or replace belts as necessary

Grease the drive motor in accordance with the motor manufacturer´s recommendations

Check the acoustic hood intake and exhaust openings, clean as necessary

Every 8,000 Operating Hours, or yearly:

Drain and replace the lubricating oil

Check inlet air filter for contamination, replace as necessary

For Additional Details: Refer to the Aerzen Blower Operation and Maintenance Manual prepared specifically for your installation.

Don´t experiment,

When considering spare parts for Aerzen equipment don´t be talked into experiments with non OEM parts. Our customers know that only original Aerzen parts are guaranteed to be compatible, and maintain the machine´s integrity. Demand the quality and longevity that only original OEM parts can supply, and purchase Aerzen spares.

Advantage to you as user

Through the use of original spare parts you can be sure that all warranties remain in force. Additionally, a fast identification of the correct parts and their avail¬ability is just as important. Our trained and experienced personnel will quickly identify the correct parts and our flexible manufacturing and powerful logistics will minimize waiting and delivery times. This in turn will reduce your downtime to a mini¬mum. This not only applies to our present product pallet, but also to machines from previous generations. If required, your spares can be on their way to your location within 24 hours.

Service coverage overview

• Warranty on all parts

• Covered for the entire machine program

• Assistance to identify the correct parts

• Extensive off the shelf availability for parts

• Short reaction and delivery times

OPERATORS: If we can be of assistance to you in selecting the proper spare parts or replacement components for your aeration blower – give us a call.

We offer field service and prompt delivery of spare parts kits & replacement components for all Aerzen Blower models, as well as coordination of factory rebuilds.

Contact us at:

Able Wright, Inc.

PO Box 849

Plains, MT 59859

(406)250-8389

www.ablewright.com

AbleWright@blackfoot.net

Doug Mitch is the founder and President of Able Wright, Inc. – a provider of water treatment equipment and technical services, specializing in disinfection and chemical feed applications in Montana, Wyoming, Idaho, and Washington.

www.AbleWright.com