How to Properly Maintain Capital Controls Equipment - Spare Part Kits & Replacements - Severn Trent

www.ablewright.com

By Doug Mitch / Able Wright, Inc.

Gas feed and analyzer equipment must be properly serviced to insure reliable operation. The Manufacturer has provided the following Operator maintenance recommendations…

1. It is recommended that the Gas Dispensing System be inspected and serviced a minimum of once per year. More frequent service periods may be required due to:

the type, quality and quantity of the gas being handled,

the complexity of the gas supply system and 3) operation procedures.

2. More frequent service periods are especially indicated when venting of the VR is occurring during the one year operational period. This is usually indicative of foreign debris holding the inlet valve open or destruction of the inlet valve parts caused by the gas quality not up to industry purity standards.

3. Preventative maintenance kits for each of the assemblies are available from the factory. Each kit contains all the parts and detailed instructions that are required for complete maintenance. All o-rings and gaskets that have been disturbed during the disassembly must be replaced during reassembly in order to insure safe, trouble free operation. Failure to replace these parts could result in a shortened operation period and bodily injury.

• Severn Trent / Capital Controls is committed to providing the highest quality parts at competitive prices. As a manufacturer of gas feed equipment for over 45 years, they have an enviable safety record. This record has been earned through meticulous attention to design, materials and quality. Capital Controls pioneered the all-vacuum method of gas feed and has been certified to the worldwide ISO 9001 quality standard since 1991.

• Using parts other than the Manufacturer´s genuine parts:

Can result in malfunction of the equipment and potentially cause serious personal and environmental health and safety concerns.

Will void your equipment warranty

Will void your liability claims to the Manufacturer

• We are extremely concerned about these issues and believe you are as well. Our recommendation is that your procurement policy for gas feed parts require that replacement parts always be sourced from the original Manufacturer, or an authorized Distributor

OPERATORS: If we can be of assistance to you in selecting the proper spare parts kit for your gas feed or analyzer equipment, or insuring that the proper materials have been selected for the chemical you are handling – give us a call.

We offer field service and prompt delivery of spare parts kits & replacement components for all Severn Trent / Capital Controls equipment, as well as factory rebuilds.

Contact us at:

Able Wright, Inc.

PO Box 849

Plains, MT 59859

(406)250-8389

www.ablewright.com

AbleWright@blackfoot.net

Doug Mitch is the founder and President of Able Wright, Inc. – a provider of water treatment equipment and technical services, specializing in disinfection and chemical feed applications in Montana, Wyoming, Idaho, and Washington.

www.AbleWright.com